feed mixer machine

Product Presentation

Introduction of stainless steel feed mixer

The stainless steel used in the barrel body of this machine will not rust if it is cleaned with water; Large capacity, just open the switch will automatically stir, simple operation, ensure safety.

A mobile small dry and wet feed mixer suitable for mixing various feeds (especially fermented feed) was successfully developed; The model is compact, with three-wheel movement and light and flexible steering.

Stainless steel feed mixer principle:

The stainless steel feed mixer adopts a single-phase geared motor, which is convenient for electricity, and can be plugged in as long as there is a lighting power supply.

The mixing drum is made of high-strength rust-free steel plate welded by precision, so there is no need to be careful about stirring fermented feed to cause rust and polluted feed; The barrel body completely changes the shape of the traditional barrel, specially designed into a funnel shape, combined with the special structure design of the churning knife, so that the processing raw materials in the barrel tumbling speed is fast, the mixing is complete, to solve the problem of uneven mixing in the bottom of the traditional mixer barrel, the mixing uniformity is high, and there is no need to worry about mixing unhomogeneous medicine when adding preventive drugs and feed additives to the mixture; Although the structure of the mixer is small, the installed gearmotor has a strong mixing force and strong stirring, and it is easy to mix and stir with grass stem powder.

Structural features of stainless steel feed mixer:

1. The mobile small feed mixer adopts a single-phase geared motor, which is convenient for electricity consumption, and can be plugged in as long as there is a lighting power supply for the bar;

2. The mixing drum is made of stainless steel plate welding, no need to worry about stirring fermented feed to cause rust and polluted feed;

3. The barrel body is designed in the shape of a funnel, combined with the special structure design of the agitator, so that the processing raw materials in the barrel tumbling speed is fast.

High mixing uniformity,

4. The mixer has a small structure, but the installed geared motor has strong mixing force and strong stirring effect.

5. The machine adopts three rubber wheel structure, front single steering wheel, so that the steering is light and flexible, easy to move and use;

Stainless steel feed mixer use:

Vertical mixer is a small feed processing equipment designed for rural breeders, small feedlots, small and medium-sized compound feed factories: it can also be used as a small seed mixer, using stainless steel cylinder, chemical raw materials can also be mixed, realizing one machine for multiple purposes; It can pack peanuts, corn, wheat soybeans, melon seeds, rice, melon vegetables, grass and tree seeds, can be continuous, fast, uniform, no damage to seeds, effectively protect the environment, so that the majority of agricultural growers can get a bumper harvest.

Precautions for stainless steel feed mixer operation:

1. The ground on which the equipment is installed should be flat;

2. Each moving part rotates flexibly, and all fasteners must be firm;

3. Sufficient grease should be added to each lubrication place;

4. Check whether the fasteners are fastened in place, and there must be no foreign objects in the drum barrel;

5. Empty running test, moving parts should rotate flexibly;

6. The material can be fed after the machinery runs normally, and the material to be mixed should enter the hopper at the same time, and each batch needs 5-10 minutes to start unloading;

7. If there is an abnormal sound response during the operation of the machine, stop and check immediately, and only after the fault is eliminated;

Each model picture